Your Position: Home > News > Technical

FOT3002 Optical Multimeter

2020/8/25      view:

The FOT3002 multi-function optical multi-meter series products are mainly used for optical signal power measurement, stable laser light source output, insert loss test, return loss test, etc., and are controlled by a low-power single-chip microprocessor with complete functions. Widely used in fiber optic cable construction and maintenance, fiber optic communications, fiber optic sensing, optical CATV and other fields. The body design is in line with ergonomic requirements, using advanced cold molding technology, beautiful and durable. The optical power meter uses a built-in detector to protect it. With a compact form factor, it can choose between backlight display and auto power off function, with an ultra-wide optical power test range.

Note: The version of the manual is subject to change without notice.


Support linear mW, nonlinear index dBm, reference dBm and relative indicator dB simultaneously

 Support red light machine

 Light work / light source / multimeter

 Insert/return loss test (optional)

 Automatic identification of wavelength (optional)

 Support automatic frequency identification

 Support threshold setting

 Support storage of 1000 data, USB connection to PC,

 PC software export data table

 Support backlight 4 level dimming

 Support user self-calibration

 Support FC, SC, ST interface

 Working hours are higher than 12 hours

 Support USB power supply function



Specification

OPM

Wavelength

800~1700nm

800~1700nm

Connector

Universal FC/SC/ST

Universal FC/SC/ST

         Connector type

InGaAs

InGaAs

Power range

-70~+10dBm

-50~+26dBm

Uncertainty

±5%

Calibrated wavelengthnm

850980130013101490155016251650

Resolution

Linear display: 0.1%, logarithmic display: 0.01dBm

Frequency detected

270Hz330Hz1kHz2kHz

Storage

1000traces

Return Loss Tester

Wavelength

1310/1550(±20nm)

Power range

0~70dB

Accuracy

±0.5dB

Resolution

0.01dB

Optical connector

FC/APC

Insert Loss Tester

Wavelength

1310/1550(±20nm)

Power range

0~70dB

Accuracy

±0.3dB

Resolution

0.01dB

Optical connector

FC/APC

Optical Light source( Option)

Wavelength

1310/1550(±20nm)

Wave width

≤5nm

output power

≥-1dBm

Stability

±0.05dB/30min

Optical connector

FC/UPC

VFL

VFL (optional)

5mw/10mw/20mw/30mw/50mw

Output mode

CW/1Hz/2Hz

Others

Working Temperature

-10℃~+60℃

storage temperature

-30℃~+70℃

Auto-off time

10min

Working time

≥12h

Dimension

186mm×100mm×50mm

Power

Rechargeable battery

Net weight

240g


Note:

1. Wavelength range: specifies a standard operating wavelength range from 800nm to 1700nm. In this wavelength range, the optical power meter can work under the specified specifications.

2. Power measurement range: The range of maximum power can be measured according to the specified index.

3. Uncertainty: the error between a certain measured optical power measurement and the standard optical power measurement